AUTHORIZED DEALER
ACE HI OIL
Norman Rinehart
Fort Worth, TX & Southlake
CALL (888) 459-9958
         (817)  431-6664

AMSOIL: The Best Synthetic Greases. Types and Uses


The Finest Technology to Every Application 

AMSOIL synthetic greases are designed to outperform competing products by providing extended service intervals, excellent pound-out and washout resistance, low-temperature fluidity and more.
AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease 
NLGI #1 and #2
Delivers excellent wear protection and extreme-pressure performance over extended service intervals in medium and heavy-duty applications. Formulated with exceptional adhesion and cohesion properties to resist pound-out and washout and provide a constant protective barrier between metal components. Reduces maintenance costs and downtime through extended service intervals or reduced grease usage. 
AMSOIL Synthetic Polymeric Off-Road Grease 
NLGI #1 and #2, .5% Moly
Provides outstanding performance in heavy-duty off-road applications. Delivers tenacious cling ability and pound-out resistance over extended service intervals, even in wet conditions. Forms a protective barrier against metal-to- metal contact. Fortified with 5 percent moly for maximum wear protection to meet Caterpillar’s requirement for pin and bushing applications. Field tests show it can reduce grease consumption, allowing operators to either maintain their current maintenance schedule using less grease, or extend the length of time between re-greasing intervals.   
AMSOIL Synthetic Multi-Purpose Grease  
NLGI #2, GC-LB
Provides superior film strength, shear resistance, adhesion properties and mechanical stability in heavy-and light-duty applications, including automotive wheel bearings. Excels in temperature extremes by providing excellent oxidation stability, high-temperature dropping points and low-temperature torque values and pumping capabilities. Formulated with oil soluble extreme-pressure additives for heavy loads, as well as additives that impart good oxidation stability and rust protection.
AMSOIL DOMINATOR® Synthetic Racing Grease                 
NLGI #2, GC-LB
Engineered to protect high-performance bearings and chassis components in racing applications operated on snow, dirt, water or track. It provides superior protection for bearings operating under high-speed, high-heat and heavy-load conditions.  DOMINATOR Racing Grease not only inhibits wear, it also maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.
AMSOIL Synthetic Water Resistant Grease                 
NLGI #2
Extreme-pressure fortified wet-duty formulation clings tenaciously to metal surfaces, providing excellent water washout and spray-off resistance. Composed of premium-quality synthetic base oils and calcium-sulfonate complex thickeners, Water-Resistant Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. Ideal for wheel bearings of vehicles and trailers frequently exposed to water, mud, snow and ice. Excellent for use in plants where machinery undergoes frequent or prolonged exposure to water. Resists rust and corrosion.  
AMSOIL X-Treme Synthetic Food-Grade Grease                 
NLGI #2 , NSF Approved, High Temperature EP
Ultra-premium aluminum-complex grease designed for food service and pharmaceutical industry equipment where incidental contact is possible. Provides exceptional performance over a wide operating temperature range of -35ºF to 350ºF (up to 400ºF in intermittent-use situations). Reduces friction and helps eliminate metal-to-metal contact. Faced with pressurized water during washing and rinsing procedures, it stays in place, resisting rust and corrosion.        
Keep Equipment Thoroughly Protected with 

AMSOIL Synthetic Polymeric Off-Road Grease


Grease-related maintenance on off-road equipment is labor intensive and requires a thorough knowledge of complete equipment lubrication requirements, while neglect or improper greasing can lead to poor equipment performance, unnecessary maintenance expenses and downtime. 

Maintenance-Related Suffering Points
  • Difficult zerk (grease fitting) locations
  • Operator neglect
  • Minimal standards for grease lubrication 
  • intervals
  • Proper grease selection
Zerks and Neglect
There are dozens of zerks on a variety of heavy-duty applications. Many zerk fittings are not only difficult to locate, but difficult to grease, even for experienced maintenance personnel. A multitude of hard-to-locate fittings presents serious potential for missed grease points, causing drastic increases in component wear that can lead to component failure and equipment downtime. AMSOIL Synthetic Polymeric Off-Road Grease provides the extra level of protection necessary to help overcome the problems associated with missed grease points and skipped lubrication intervals, staying in place longer and providing better lubrication for extended periods. By providing a safety margin for when grease points are missed, allows extended equipment life and peace of mind, even during severe-service operation. In addition, is formulated with 5 percent molybdenum disulfide (moly) for an extra level of protection, actively separating metal components when lubrication intervals are skipped.

Lubrication Intervals
Standard original equipment manufacturer (OEM)-recommended greasing intervals fail to consider unique circumstances such as extreme service, company maintenance procedures or environmental conditions. Similar to automotive OEM-recommended oil drain intervals, recommended off-road equipment grease intervals do not consider the use of high-quality products, which can safely extend lubrication intervals. Although following OEM guidelines is typically a good start for developing proper maintenance procedures, unique circumstances can alter interval requirements significantly.


Grease Selection
Use of greases with incompatible thickening systems can result in severe equipment wear as certain incompatibilities can cause hardening or softening of grease in equipment components, jeopardizing protection. AMSOIL Synthetic Polymeric Off-Road Grease incorporates a calcium-sulfonate complex thickener, which is compatible with nearly all major thickener types, including lithium-complex-thickened greases.

Operational Suffering Points
  • Grease pound-out
  • Water washout
  • Dirt and contaminant ingress
Pound-Out Resistance
The repetitive pounding action of everyday operation puts severe strain on equipment pivot points, causing inferior greases to pound out of place. When pound-out occurs, there is no base oil to provide proper separation of metal components, leading to increased wear, and no seal to keep water and abrasive contaminants out, leading to rust, corrosion, pitting and component failure. AMSOIL Synthetic Polymeric Off-Road Grease effectively resists pound-out and keeps equipment properly lubricated during extreme-pressure shock-loading and high-impact operation. 

Water Washout and Contaminant Ingress
Grease in heavy equipment is often subjected to environmental contaminants, including water. When inferior grease is exposed to water, it presents major potential for washout, or grease washing off the equipment components. This not only increases metal-to-metal contact and wear, but also the potential for rust and corrosion. AMSOIL Synthetic Polymeric Off-Road Grease has exceptional adhesion and cohesion properties, allowing it to remain in place during wet operation and cleaning. It also provides excellent water washout test (ASTM D1264) values (1%), effectively protecting metal components from the harmful effects of water contamination. By providing superior sealing ability, also overcomes problems created through contaminant ingress, actively deterring abrasive contaminants from entering pivot joints and providing better seal protection, maximizing equipment life.

AMSOIL Synthetic Polymeric Off-Road Grease is designed to provide superior lubrication, protection and extended service intervals for virtually all off-road equipment grease points, including heavily loaded pivot points, bushings, articulation points, machine implements, universal joints, driveline grease points, equipment wheel bearings and other grease-lubricated components.
NEW!

The AMSOIL Deluxe Grease Gun Kit (GLCGN) makes the job of greasing equipment even easier.

  • Designed for small 3-oz. grease tubes only
  • Develops up to 3,500 psi, ensuring grease is adequately applied to the application
  • Improved pumping performance
  • Two convenient grease-distribution options (flexible hose and rigid pipe). 
  • The pistol-grip design and rigid hose allow one-handed grease application, while the flexible hose eases access to hard-to-reach locations.
  • Two head ports for increased flexibility and comfort
  • Plastic tip cover protects against debris
  • Easy-to-use plunger simplifies loading
Save up to 25%

$10 for a six-month membership
Save up to 25% on Every Order
Exclusive promotions and more
FREE SHIPPING

Order $100 or more in AMSOIL products at full retail prices and receive free ground shipping anywhere in the continental U.S.
CONTACT

 (888) 459-9958
      (817) 431-6664


 2900 Knight Ct
 Southlake, TX, 76092
United States
© AMSOIL INC. 2017  |  www.amsoil.com